Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cap & Crown in Southampton: What to Know First
We provide independent Olympia Chimney chimney cap and crown service throughout Southampton, from the village center to the lanes off Meadow Lane and Ox Pasture Road. Most Olympia Chimney cap replacements and crown repairs are completed in a single visit, with upfront pricing agreed before we start. A standard stainless cap installation on an Olympia flue typically runs $280 to $480, while crown coating or rebuild ranges $450 to $1,200 depending on access and damage.
This page is for homeowners who already have an Olympia Chimney liner, cap, or crown and need a technician who knows the product line without needing a manual. We are not affiliated with or authorized by Olympia Chimney. We are an independent Olympia Chimney service provider with no ties to the manufacturer, which means we choose parts based on what your chimney actually needs, not what a distributor wants to move.
Call (516) 619-2915. A live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 316Ti flexible liner caps corrode at the mesh weld points. The titanium-stabilized steel resists flue gas well, but the spot-welded mesh on factory caps traps salt air from Southampton’s coastal exposure. We see this on waterfront homes in Sagaponack and along the Shinnecock Bay. Our fix: a Gelco or Copperfield multi-flue cap with fully seam-welded mesh, or a custom-fabricated cap with 304 or 316 stainless construction and no exposed weld points.
- Olympia Block-Off Plates used as temporary caps become permanent problems. Some installers use Olympia’s block-off plate as a cheap cap substitute during liner installation. After two winters, the thin-gauge metal deforms and lets driving rain straight onto the crown. We remove the plate, inspect the crown for spalling, and install a proper rain cap with minimum 4-inch overhang.
- Olympia oval-to-round adapter caps fit poorly on masonry flues. The adapter is designed for factory-built chimneys, but we find it forced onto older Southampton masonry. Gaps at the shoulder collect creosote and let water weep behind the face brick. We fabricate a transition collar or source a proper Gelco masonry cap sized to the actual flue opening.
- Olympia Chimney’s standard mesh size (5/8-inch) clogs with pine needles from Southampton’s pitch pines. The conifers around Peconic Bay drop needles year-round, and 5/8-inch mesh traps them against the cap screen. Reduced draft follows, then smoke backup. We upgrade to 3/4-inch mesh on replacement caps, or install a peaked cap with greater surface area so debris sheds rather than packs.
- Olympia crown flashing on packaged systems is often too shallow for New York frost line. The included step flashing is adequate for milder climates. After freeze-thaw cycles in Southampton, we see lifted flashing and crown cracks at the perimeter. We remove the factory flashing, cut deeper reglets into the brick, and install custom copper or lead-coated copper flashing with a minimum 6-inch vertical leg.
Our Olympia Chimney Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers (516) 619-2915, 24/7. We book a window, confirm the address, and note any Olympia Chimney model numbers you have.
- 2
Level-2 camera inspection on arrival. Our technician runs a camera up the flue before touching the cap or crown. You see the footage on a tablet. We document liner condition, creosote buildup, and any gaps at the top of the Olympia liner where it meets the flue wall.
- 3
Diagnosis and parts decision. We identify whether your cap is salvageable or if corrosion has reached the point of replacement. For crowns, we determine if a HeatShield coating will bond or if the concrete is too spalled. We stock Olympia-compatible caps and carry DuraFlex, Gelco, and Copperfield alternatives when OEM is back-ordered or overpriced.
- 4
Upfront pricing, then the work. You get a written estimate with one number. No add-ons after we start. Most cap replacements take 90 minutes. Crown coating needs 24-hour cure time; rebuilds may require a return visit for mortar curing.
- 5
Post-repair test and documentation. We run the camera again after cap installation to verify no liner displacement. We photograph the finished crown or cap from the roof and ground. You get the photos, the verdict in plain English, and a written invoice.
- 6
The 90-Day Done Right Promise. If water gets in, if the cap shifts, if anything is not right, we come back. In writing. No arguing.
What Olympia Chimney Chimney Cap & Crown Costs in Southampton
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney cap replacement (standard stainless) | $280 - $480 | Flue diameter, single vs. multi-flue, mesh upgrade |
| Custom-fabricated cap for Olympia liner | $450 - $780 | Copper vs. stainless, decorative bands, wind resistance rating |
| Crown coating (HeatShield or equivalent) | $450 - $850 | Crown square footage, crack depth, number of coats |
| Partial crown rebuild | $780 - $1,200 | Scaffolding needs, rebar exposure, frost damage extent |
| Full crown removal and pour | $1,400 - $2,400 | Accessibility, chimney height, matching existing slope |
Water damage found during cap removal - rotted fascia, compromised flashing, or liner displacement - is quoted separately before repair. We do not proceed without your approval. Estimates are free. Call (516) 619-2915.
Why Southampton Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We have been sweeping and repairing chimneys on the South Fork since 1984. Russell Haines and our crew have worked on enough Olympia Chimney systems to know which parts fail first in salt air, which adapters fit poorly on 1920s masonry, and when a $280 cap beats a $600 OEM replacement.
Our Level-2 inspections end with photos you can see and a plain-English verdict. Our technicians are background-checked, uniformed, and carry the professional-grade brands that work with Olympia systems: DuraFlex for liner transitions, HeatShield for crown restoration, Gelco and Copperfield for caps that outlast the originals. The 90-Day Done Right Promise is in writing with no arguing. A clean flue does the talking - you just need a warm fire to hear it.
A live person answers every call, every hour. Most jobs finish in one visit. The number on the estimate is the number on the invoice.
FAQs
It will not void the liner warranty if the cap is properly sized and installed. Olympia Chimney’s liner warranty covers defects in the liner itself, not ancillary components. We document cap specifications and installation photos so any future claim has clear evidence the liner was not modified. If you have concerns, call (516) 619-2915 and we will review your warranty paperwork before booking.
A quality stainless cap lasts 15 to 20 years in Southampton’s coastal climate, though salt spray from direct waterfront exposure can cut that to 10. The factory mesh weld points are usually the first failure. We see Olympia caps needing replacement at 8 to 12 years on homes within a quarter-mile of the bay. Our Gelco and Copperfield replacements with fully welded construction typically outlast the original.
We can coat and seal a crown with surface cracking and minor spalling using HeatShield or a similar professional-grade crown coat. If the rebar is exposed, the crown is separated from the brick by more than 3/8-inch, or freeze-thaw damage has penetrated more than an inch deep, partial or full rebuild is the honest recommendation. We show you the camera footage and explain which category yours falls into.
We stock common Olympia-compatible caps, adapters, and flashing components. For specialty Olympia parts that are back-ordered, we source equivalent professional-grade components from Gelco, Copperfield, or Famco that meet or exceed OEM specifications. We do not leave a flue open while waiting for a box to arrive.
Water stains on the firebox walls or a damp smell after rain usually mean the cap is leaking or missing. Crown failure shows as water entry at the chimney shoulder, deteriorating mortar joints below the roofline, or pieces of concrete in the firebox. Our inspection determines which is which. Sometimes both are compromised. We explain what we found, show you the photos, and quote only what needs doing. Call (516) 619-2915 for a free estimate.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Southampton and nearby areas.